InfoSIght is now available for 3PAR to get up and running check out my 3PAR and InfoSight Setup Guide
Whilst at HPE Discover I managed to nab some screenshots of the new 3PAR implementation of InfoSight. You can read my post about all the InfoSight announcements.
To get InfoSight up and running with 3PAR you will need a have a minimum of 3PAR OS version 2.2.x and Service Processor (SP) version 2.4.2, since this is a very old release this should allow most customers access. If however you wish to have the the integration with VMware the requirements are a little more stringent you need to be running 3PAR OS 3.3.1, have an active support contract and have the 3PAR communicating back to base and a service processor on 5.0 MU3. The initial release, available in January will focus on delivering greater insight into the performance of VM’s on the storage. This is achieved by adding additional functionality to the Service Processor which will allow it to talk to the vCentre in your environment. Once you have your 3PAR setup with InfoSight you will see two key areas of information, storage information which today will be the same as information being retrieved from StoreFront remote. Secondly you will see the virtualisation layer info being pulled back from vCentre.
Below is the screenshots I managed to gather of InfoSight with 3PAR:
Key host storage performance stats – IOPS, latency and throughput
More typical storage related information
High level VM overview
The following screens allow “noisy neighbour analysis”. They look at various stats to identify which VMs are working your environment the hardest and potentially causing contention in the environment.
Top VMs by latency and IOPs
Top VMs by CPU usage
Top VMs by data usage
This menu shows all the contention reports available
Seen the 3PAR simulator video setup guide?